Saturday, January 29, 2022

Fritz Otto Photographing Buchbinderei

Despite how easy it is to take pictures these days, Fritz Otto prefers black and white film. It's the tones and graininess he likes. Here we took some interior images of Buchbinderei before putting it back on the layout. The black and white images he took using a self-timer, though it was very hard to hold still for those 1-2 seconds.

All images shot on Ilford HP5 400 speed black and white film using a tripod and cable release for these 1-2 second average exposures. And no, I did not forget the Farbfilm. Lighting was provided by the cool white fluorescent in the task light visible in the first image below.

Taking a photo of the little scene.

Here an up-close view.

Holding v-e-r-y still.


An overhead with the roof off.

Putting the roof back on.

And, back to the layout it went...

Friday, January 14, 2022

Bindery Done

There was once a bindery in Berlin that was situated under railroad tracks... Incorporating that into my train layout seemed like a wonderful way to combine interests...

This is the concluding post of my "bindery" thread, wrapping up my big push in the last week or so to outfit the interior of the bindery. Shelves and cabinet fronts downloaded from Scalescenes, a few shelves ordered (3-d printed and laser cut) that still require work, but the heavy lifting of workbench, counter tops, board shear, Prägnant stamping press, and standing press were all scratch built to 1:87 or thereabouts. As a frame of reference most figures are just under 2cm tall, and "standard" bench height is about 1cm high.

Not sure why I do this to myself as it would have been so much easier to just glue in some photos from a bindery, set back behind the [grimy] window to make it look realish. What I do know is that it wouldn't have been half as much fun. Bonus, Fritz Otto and his smaller hands helped out a lot.

Counters and shelves assembled. That dropped section is
that way for a reason. 😉

Bench assembled. It has storage shelves
underneath for board and paper.
The black things are parts for the board shear.

No, that's not a Star Wars TIE fighter... Just board shear parts.

The assembled board shear, really just a massively over-sized
paper/sheet metal cutter. Note the blade...

Bindery staff debating the position of the blade when not in use...
Down like above, ...

..., or up like here. Most colleagues seem to say down.
I have mine up, so it's ready to use...
Yes, the blade moves.

Next piece of equipment, the Prägnant stamping press.
I loved using this as an apprentice because it was very easy to
adjust and you could see exactly where the type was going...
More here on Instagram.

See where the Prägnant stamping press goes.
Lower than the counters is the ideal working height.

Last big piece of equipment, a standing press. Still want to make
some hand-/finishing-presses, but yikes...
Note the posters on walls.

The posters for the bindery walls pull together a lot of threads from my bookbinding
related life, from Ernst Collin and W. Collin, to Babette, to Werner Kiessig,
to apprentice journal cartoons and bindery advertising.
Several also reference women binders, and this is a woman run bindery.

The bindery has a copper clad roof, too. And, yes, it is removable
to get the best view of the details, and light it up, sort of. 
Still some details to add like awnings over the side door and windows.

Also going to replace the windows. I liked the griminess,
but when sealing it with mat spray it got too cloudy.
It's good to have clean windows, and this is Germany after all.

Looking in through the new windows.

And more windows you can see through. Also added some window boxes an awning above.

We're closed now, but it looks like someone left their bike outside.
Hopefully, it'll still be there in the morning.

Still to do beyond the things already mentioned, making some Potemkinish stacks of work in progress, and hanging a shingle from the facade. Loving how this looks, and glad to have this model on my train layout, especially as it ties together so many personal experiences and research interests.

Getting the windows washed for the public opening of Buchbinderei.
The bike seems to have made it through the night unscathed.

Buchbinderei at night. Everyone is working late...

Buchbinderei is also no more, the space having become Tipico, a betting salon. As can be expected, the facade was repainted as well. I will imagine that the original Buchbinderi is just hidden beneath the sign... 

Tipico, formerly Buchbinderei, in Berlin.
Photo by https://buchrestaurierung-berlin.de/.
Danke für die Aufnahme.


Saturday, January 1, 2022

Bindery Interior Progress

It's always wonderful when different parts of our lives and interests can intersect. In addition to bookbinding and conservation, model railroading has long been an interest and big part of my life, also in terms of basement square footage. 😏

In an earlier post, I described using photographic images to reinterpret an existing structure on my layout. At this stage almost all the structures on my layout are made from cardboard and paper including laser cut kits, but increasingly built from scratch by me using scraps from the bindery. In addition to the raw materials, there are also the skills of a binder that are widely applied, especially box making. After all, what is structure but an overly complicated box. You can read descriptions of some other similar projects on my main model railroad page.

Fritz Otto inspecting the facade so far.

Still a ways to go, but the elements fit on this weird, triangular
building site. Here the new bindery owner Gertrud Jannowitz poses
in front while her picture is taken [for the local paper?].

More images of the bindery exterior construction on the Papphausen blog. Papphausen? Papp[e] = card or cardboard. Makes sense, right?


Still to be determined is the interior, but the space is framed out, walls up, ... Pics of that process here. Now comes the hard work of detailing the interior with shelves, benches, storage, a desk, stools, a board shear, presses... We'll see how I make it work, but in 1:87?!?! I'll figure something out.

Looking in...

Finally, another fun fact is that there are numerous bookbinders and practitioners of allied arts and crafts who are also ferroequinologists. Gary Frost, Bernie Vinzani, and Bob Hanmer come to mind. Know anyone else?

Tuesday, December 21, 2021

Pressbengel Deluxe Edition

Sometime late this summer while googling around aimlessly, I found a link to what was described as the deluxe edition of Ernst Collin's Pressbengel bound in full parchment. This was on my bucket list and given that it was limited to 30 copies bound in either full leather or parchment, the time it was published in, and the history of that time, including WW II, I felt it was nothing but a dream. The Heftlade the journal of the Jakob-Krause-Bundes published by Ernst Collin had an advertisement for the Pressbengel. A copy of the deluxe in leather is depicted in the Max Hettler collection collection in Stuttgart, the binding for both variants bound for the Euphorion Verlag by Hübel & Denck in Leipzig. 

Regular with spine of deluxe bound in parchment at left.
The title stamping is identical between the leather and
parchment variants of the deluxe edition.

Der Pressbengel, 1000 copies bound in paper,
30 copies on handmade Zanders rag paper, bound 
in full leather or parchment.

Below the pricing for the Pressbengel, leather or parchment for 85 Marks, paper for 4.50 Marks. This was during the period of hyper-inflation that started the end of 1922 and extended through 1923, so I will need to do some real math as hyperinflation currency was printed at ever greater denominations. A website that converts historical currency values calculated that 85 Mark (1922) has a value of $3931.93 current dollars, and 4.50 Mark (1922) $208.16 current dollars. Can that be right? More on hyper-inflation in my annual post from 2020.

85 [Gold] Marks for the deluxe, 4.50 for the paper binding

Anyhow, back to the listing I found googling... I had not given myself a top-end budget for the deluxe, so ordered on the spot and had it arrive ca. 3 weeks later. Below pictures with some detail views that also raised questions...

Spine and front of deluxe. The book was
sewn on 5 parchment slips.

Colophon indicating this copy number 7.

Top edge gilt with hand-sewn endband. All leaves are perfectly
flush and gilt.

An Euphorion [Verlag] binding.
Note the sloppy trimming with the blue (fill?) underneath.

Bound at Hübel & Denck in Leipzig.

Cloth guard around made endpaper signature.
Paper on verso of 1st and 2nd flyleaves identical to text.
The cloth was common on full vellum bindings. and would have
extended across the full width of the doublure. This is also how
I learned it during my apprenticeship in Germany.

The 5 vellum slips as seen through the doublure.
Note the staining on the flyleaf, also visible in the back.
Was the staining and abrasion/tearing in the joint the result of
a repair, or do we blame an apprentice?

Handmade rag paper for the text block measures 10 thousandths
of an inch or .25 mm. Rather thick and stiff...

Ernst Collin wrote an article about the publisher's bindings created for the Euphorion Verlag at Hübel & Denck in the Archiv für Buchgewerbe und Graphik, vol 58, 1921 (pp. 270-271). Pictures accompanying the article can be viewed here.

In the article, Collin wrote "that the bindings he viewed for the article were less than beautiful (wenig schön) but serviceable exemplars of what we would consider fine bindings... The bindings are stamped with Euphorion Verlag and Hübel & Denck Leipzig." Keeping in mind the exponential increase in luxury editions, Collin wrote that the owner of such an edition is [still] entitled to work that  represents the best in terms of craft and aesthetics, balanced against the cost pressures exerted on the publisher, and always bound by hand. Production of these bindings was managed by Heinrich Bahle who was a member of the Jakob-Krause-Bundes (precursor to the Meister der Einbandkunst). Collin notes that by indicating the relationship between publisher and binder that it was a joint effort. This also includes the effort that went into the work of the publisher, such as negotiating with the printer about type face and typography, something that is not always as perfect as it should be at the beginning of a relationship. Continuing, Collin notes that these bindings are created using classical tooling patterns and that the judgement of the expert bookbinder is critical, given that the publisher is not an expert in these areas. He closes with the remark that the illustrated bindings are representative of this collaboration, even if they can only give a weak impression of the beauty of the work. Taken together, Collin seems to be indicating that while a good start, the relationship and results of Euphorion and Hübel & Denck has room for improvement. Collin writing this article and then publishing his Pressbengel with the same publisher, a regular occurrence for him and others illustrates how tight-knit the bibliophilic fields were.

This was written a year before the Pressbengel was written and published. Examining my binding of the deluxe in parchment closely leaves me in agreement with some of Collin's sentiments in the article. I cannot tell whether the "sloppiness" where the doublure was trimmed and the staining and abrasion in the joint of same are the result of a repair or regular production, but the choice of very heavy paper, more like cover stock really, and other details lead me to believe the latter. Other factors include that the deluxe was likely bound on sale to the collectors preference and the overall impact of hyperinflation on labor, materials, moral, ... meaning that it may have been "good enough".

Sunday, December 19, 2021

Adding a Bindery to My Papphausen Train Layout

Back in 2014 I had shared images of what used to be a bindery located in an arcade under the Railroad and S[tadt]-Bahn tracks in Berlin. They weren't beautiful brick or stone arcades, but brutalist concrete on what is a kind of island between busy streets.

Yesterday, while surfing Google Maps I found that they had updated the images in that area, this time with an S-Bahn train overhead.

Buchbinderei near to Jannowitzbrücke, Berlin.

I think I will interpret that idea on my layout but opening a bindery in the lot below to the right of the gate and going back at an angle. The pigeon shack and BMW 2002s will need to be relocated...

The lot for the new bindery.

The facade of the bindery I apprenticed in Gelsenkirchen could also easily be adapted to the lot, and I have views that I can use to create the interior details regardless the facade. Rather than running on top of the bindery, the mainline runs above.

Bindery I apprenticed in 1985-87.

Should be a fun and relatively easy project to distract me from the main project of redoing the area around the turntable, finishing the Schrebergärten next to Posten 210..., and real bookish projects.


Monday, November 8, 2021

Taking a Break

I know this blog has been very quiet for the past month and a half, but after a very busy summer and early fall, I decided to take a break from the books and decompress with some training. The trains have been long neglected, in need of a deep dusting and cleaning, and most of all just wanted to be run again. Fritz Otto agreed, helped, and got in on the fun. In some respects it was a very "meta" experience. There are a lot of bookbinding skills applied throughout the layout, too, particularly box making, as most of the structures are made of card, some kits, but most built from scratch using photos as a basis with photo-realistic pattern sheets.

So, while dusting, cleaning, and running trains, I will be thinking of next steps on a few bookish projects. First and foremost turning the research from my Pappband/Ur-Bradel workshop that I taught for the University of Iowa Center for the Book into some form of article for somewhere. I also want to finish my German-language version of the fish skin articles. I also want to finish some binding projects and start new ones, in addition to continuing to share all my bibliophilic rabbit holes. Mind you though, all at a more relaxed pace with little to no pressure.

What would YOU be interested in learning more about from the German binding traditions?

Wednesday, September 1, 2021

Down The Rabbit Holes For The William Anthony Conservation Lecture Series

Join me as I jump into some of my addictive, all-consuming, and yet, sustaining rabbit holes in Down the Rabbit Hole: Embracing experience and serendipity in a life of research, binding practice, and publishing, part of the William Anthony Conservation Lecture Series

The lecture will be at 6:00 CST on September 30, the workshop for students of the Center for the Book and staff of the Conservation and Collections Care Department  on the "Ur"-Bradel binding will be on October 1st and 2nd.

View the recording on the University of Iowa Libraries' YouTube Channel below or via this link. Lecture slides with notes can be downloaded here.


Below the adverts for the event.

For more information on the lecture, see the William Anthony Conservation Lecture Series page at the University of Iowa Libraries, or the events calendar.


Hope to see some of you there.