Visit to a Hand Bindery in Trier - Buchbinderei Mohr

Was searching YouTube for some bindery videos from Germany and came across this one from the Buchbinderei Franz Mohr in Trier, Germany. The Buchbinderei was founded in 1864 (via Archive.org), and was stop 1 on my apprenticeship interview tour in May 1985. The location was very convenient as I flew into Luxembourg from Baltimore... Trier has an incredibly rich history.

The Buchbinderei Mohr as I saw it in May 1985.

View in same direction from the video.

Device for fan gluing (Klebebindung, aka Lubecken) that starts at 2:08. It appears to be the same
as being used [by the Geselle?] in the foreground of the first image.

Here the video that shows the steps of case binding journals and periodicals for town, municipal, medical, law, ... Below the full video.

I did not end up apprenticing there, but it was the hand-bindery the other two I visited were compared to in terms of the type of work completed and overall atmosphere.

Fritz Eberhardt’s Finishing Tools and Technique

It was once again my pleasure to collaborate with Don Rash and his Boss Dog Press by translating essays from the German that highlight the work of one of that tradition's finest binders, a student of Ignatz Wiemeler. From the downloadable prospectus: 

The Boss Dog Press is pleased to announce the upcoming publication of Fritz Eberhardt’s Finishing Tools and Technique, the sixth book from the Press and the third volume in the series Eberhardtiana. The goal of this series is to preserve the writings and art of fine hand bookbinders Fritz Eberhardt (1917-1997) and his wife Trudi (1921 -2004). In addition to being two of the finest binders of the twentieth century, Fritz and Trudi were teachers, mentors and good friends to many practitioners of the book arts, and their work and lives deserve to be remembered and celebrated. It has been the honor of the Press to do this in a small way.

Finishing Tools follows 2004’s Rules for Bookbinders and 2014’s Three Lectures. It catalogs 94 unique finishing tools which Fritz fabricated for tooling in blind and gold on his design bindings. Each tool is represented by a description, measurements, and a scanned image of the tool’s impression. There will also be digital photographs of the tools, of the electric tooling station that Fritz used, and of a paper tooling pattern used on Fritz’s design binding of Gordon Craig’s Paris Diary. The catalog proper is preceded by two essays dealing with Fritz’s work, one by Professor Hans Halbey and one by Fritz himself. The essays were published together in the March 1990 issue of the German bibliophile journal Philobiblon. 

Millimeter binding (Edelpappband) covered in decorated paper
by the binder with tooling based on Eberhardt's unique tools,
leather trim at top and bottom, and title stamped in gold. 

Title page with photo of Eberhardt tooling a binding.

One of Eberhardt's bindings and the beginning of the essay where
he discusses his binding philosophy.

Photos of Eberhardt's tools with description and
printed impression of the design.

From the colophon:

This is the third volume of EBERHARDTIANA. It was compiled, designed and executed by Don Rash, with the ongoing support of Elaine Rash. Types used are digital versions of Herman Zapf's Aldus for the text and Michaelangelo for the titling. The book was composed in Adobe InDes1gn. Boxcar Press supplied the polymer plates for printing. The paper was made at the University of Iowa Center for the Book by Tim Barrett and student co-workers, and as printed damp on the BDP Washington handpress. Inks are Graphic Chemical Albion

Matte Black and Hanco Leaf Brown. The tool impressions in the catalog were done by scanning smoke proofs, converting them to printable images in Adobe Illustrator and printing them with the text. All photographic images are digitally printed onto 48 gram Asuka paper.

The edition consists of 80 copies, with 10 copies (I-X) unbound, and with 50 regular copies (1-50) and 20 hors commerce copies(A-T) bound in full decorated paper over boards with leather strips at head and tail.

To learn more about the Eberhardt's, read their oral history recorded by Valerie Metzler, in which they discuss their life, their training, their time in the United States, and much more. It can be found in Volume 37, Number 2, 2002 of the Guild of Book Workers' Journal. Very much worth reading.

500 Years of the Art of Printing

Just received this lovely tunnel book, 500 Jahre Buchdruckerkunst, 1440 - 1940, that was issued by the Bauersche Gießerei (Bauer Type Foundry) in Frankfurt. It was created by the illustrator Fritz Kredel. Kredel was helped out of Germany by Melbert Cary in 1938. RIT's Cary Graphic Arts Collection was endowed by the Mary Flagler Cary Charitable Trust as a memorial to Mr. Cary, together with funds to support the use and growth of the collection. As they don't seem to have a copy, it seems only fitting to gift it to them. 

For a while it seemed the little gem was lost. But no, the journey from the antiquarian dealer in Madgeburg to Syracuse took 3 months and the item dropped out of postal tracking systems after 2 months, only to reappear the day before it arrived. Who knows where it languished, Frankfurt airport, New York?!? 

Here Fritz Otto helps me set it up for these pictures by holding on to the far end.

Fritz Otto holding the far end...

Side view showing the panels.
The accordion folds are at the top and bottom.

Shall we peek inside?

Oh look, a print shop. Type casting at front, right; type setting at front left;
printing in the middle, note the sheets hanging above, so the ink can dry;
and in the way back inspecting the final product.

As this is a German print shop, the paper will in all likelihood be unsized at this stage. As described in Prediger's Der Buchbinder und Futteralmacher (1741), the binder will size and beat the paper with a specially shaped heavy hammer before binding. Jeff Peachey describes this process in detail on his blog.

Another Sprayed and Stenciled Paper

Recently acquired another volume of the Archiv für Buchbinderei (Vols. 21-22, 1921-22). Another article by Ernst Collin, and 2 brief mentions/reviews of his Pressbengel. More about the Schablonenspritzpapier technique here and here. 

Fish Skin Tanning in Newsreels

Thank you to Gloria Conti, conservator working in Scotland who found this Italian newsreel from 1938 titled Le tante utilizzazioni della pelle del pesce. The film shows the processing of fish skins into various products. Gloria provided a translation of the brief narration below.

The many uses of fish leather 

In Germany fish leather is very in vogue. After being tanned, worked, dried, and handled with meticulous patience, it can be used to make many things like we see here: shoes, handbags, gloves, belts, and even to bind books.

Thank you Gloria. 

The imagery looks like the photos used to illustrate Franz Weisse's article "Fischhaut - Fischleder - Fischpergament" published in Das deutsche Buchbinderhandwerk, Vol 2, Nr 9, 1938. I described that article and shared some of the images in my post "Fish Skin - Tanned Fish Skin - Fish Parchment."

Perhaps the footage and images were taken together?

Often, when one gives, one also receives, so here a similar newsreel clip from British Pathé, 1949. This was shared on the Adventures in Fish Skin Tanning (closed) group at Facebook. It describes the process as having been developed by two Poles. No books in this one.

The first clip described the tanning... of fish skin in Germany. The second in the U.K.

My question, are there articles and references in the bookbinding literature outside of Germany that describe using fish for binding...?

Bookbinding and Adapting to Life Changes 2

In my post "Bookbinding and Adapting to Life Changes," I wrote about changes I've made to my studio equipment and how I approach some tasks... One of the things I mentioned was the challenge of using a board shear (Kutrimmer 1070) when one cannot push down on the foot clamp peddle. Being seated on a scooter makes it even more challenging... The wheels on my old indoor scooter were small diameter, but when I needed a new one this fall the wheels were larger, and I found that I could force myself on the clamp. That worked, but was a bit hairy (tipping danger) and caused the light board shear to wander.

Well, as we say in German, "what one doesn't have in the legs..., one needs to have in one's brain." (Was man nicht in den Beinen hat muss man in der Birne haben.). But, a small ramp... Hmmm. Sooo, threw together a simple ramp made of staggered off cuts of thin pink foam insulation board held together with a rubber band.

Very sophisticated construction... 🙄 First test. Will it work?

Fritz Otto was worried he'd have to hold the ramp
in place as it slide on the carpet while I moved back
and forth on the scooter. But, it worked. Just a few tweaks...

On to board shear ramp Mk. 2. This ramp has one more thickness of pink foam board (5 total), binders board top, e-flute corrugated bottom, some glue and packing tape to hold pieces in place, and velcro to hold it in place on the carpet. 

Much more robust and sophisticated construction.
It's also almost twice as wide.

Velcro hooks on bottom to keep it from moving on the carpet.

I should be in business for 80% of my cutting needs. I'll take it. For those other times, Hope is always happy to help. The independence will feel good though.

[Edit 13 March, 2021]

Thanks to Jeff Peachey I even have a very solid and attractive wooden "forever" ramp now.

The incline and Jeff's message. I love the twisted humor.

Indexing Shears

Lots of books have need for indexing tabs, books such as directories, address books, and ledgers. The marks for the index are placed along the fore-edge of the book. These can be half-round cuts called "thumb indexes" like those found on many dictionaries, or they can be strips of decreasing length that are cut out of the fore-edge. It is the latter I will show here. 

Mary Sullivan of Crowing Hens Bindery in Nashville, TN reached out to me about this topic and provided the beautiful images of her German-style indexing shears and an image of the one described in Wm Atkins Account Book Binding - A Classic Article on Folding, Sewing, Equipment,..., pg 33. Note: This is text is available as Print on Demand and is excerpted from The Art and Practice of Printing by John Mason, edited by Wm. Atkins. Mary, by the way makes beautiful springback bindings. Check them out on her website. They open flat and are great for writing in.

Mary Sullivan's German Indexing Shears (top).
Hickock Index Shears from Atkins, pg 33 (below).

Here is an image of shears, including the Registerschere from the 1928 catalog (pg. 38) for Braunwarth und Lüthke in Germany.

The Registerschere is 2nd from right. The elongated shape
between the handles shows the shape of the cutout.

Both feature an adjustable gauge to set the depth of the cut. So, how would one go about using these.?

First, one would need to determine how many cuts need to be made. In most traditions there are letters that might be combined, or even left out. The indexing tabs would also need to be evenly spaced out to have a clean looking index along the foredge. So, how would one do this? Math by dividing height of textblock by number of tabs, or is there an easier way? Well, it so happens that there is, reusable even. As an aside, this idea can also be easily adapted for determining sewing stations of pretty much any number for any common book. Just lay the signature on the template so that the textblock aligns at top and bottom, then transfer marks.

Index Scale Card from Atkins, pg 32.
Note "X" at the top and the added "Mc" at the bottom.

Register-Einteilungsschema from Fritz Wiese's Werkzeichnen für
Buchbinder, 1937. Note the combined and added indexing tabs.
We called a Registerkamm where I was an apprentice. Kamm = comb.

Paul Adams described how to cut these tabs in his Practical Bookbinding (1903) on pages 166-67.

For all such work a thumb index is generally required; each page takes one or more letters, or a specification is given, according to which the binder counts off the number of pages required for each letter—X and Y being here excluded. Nowadays, the indices are cut with index shears, which not only regulates the depth of the index but also avoids the acute angles which are so easily torn in.

Commence cutting from the back, that is, with the Z ; this, being the last letter, is not cut out. Then count off W, cut with the shears, and cut off what remains below to the bottom edge with a sharp knife, to do which a narrow thin board [or sheet of zinc] is slipped underneath. The further you proceed towards A, the longer is the strip which has to be cut out with the knife. When the excisions for the whole alphabet have been made, the letters are pasted on. These are sold ready printed, and nowadays are almost always in one piece for back and front. 

The printed sheet with the alphabet is glued or gummed on the back, and, after drying, the alphabet is creased lengthwise and either cut so or punched out with a suitable tool. The single letters are damped and stuck in position.

When cutting with the shears, it is useful to cut a manageable number of pages at a time for comfort, and to keep "round" of the foredge, such as it will be. This cutting, as well as the vertical cut described by Adam above can be done before or after sewing.

Here what the index looks like. Image taken from Mary's copy of Leonard Monk's A Text Book of Stationary Binding, 1912.

The cut out indices.

Finally, some beautiful images of Mary's German shears, with the final one of them in use.

The brass "clip" at bottom holds the shears closed when not in use.

View of the shears showing the wide cut on the right.

The shears in use showing various cut depths.